User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Pocket LOOX 610 in mobile use Using battery
38 A26391-K139-Z120-1-7619
Connecting Pocket PC directly to power adapter
i
In the following text the letters and numbers after the designations for the various cables
refer to the illustration Delivery scope in your "Getting Started“ manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
Ê Connect the power adapter cable to the DC socket (27) of the Pocket PC.
Ê Connect the power cable (F) into the power adapter (F).
Ê Plug the power cable (F) into a mains outlet.
The integrated battery of your Pocket PC will be recharged.
Optimising battery performance
When you have completely charged the battery, you can operate the Pocket PC for up to 12 hours
without a power connection. However, it is not possible to exactly specify the maximum operating
time, as different applications use more or less energy.
In the system settings you can make settings that help you save energy when using your
Pocket PC. These settings enable you to use the battery operating time optimally. Please see the
"Configuring Pocket LOOX 610“ chapter for information on how to save energy.
i
In the default setting, a setting is activated that automatically switches the Pocket PC into
the Suspend mode after three minutes when working without a power connection if no
entries are made during this time. You can switch on the Pocket PC again at any time by
briefly pressing the Suspend button and then continue working where you left off.
Checking battery charge level
You can display the battery charge level under Start - Settings - System - Power.