User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
A26391-K139-Z120-1-7619 37
Pocket LOOX 610 in mobile use
The Pocket LOOX 610 is equipped with a powerful battery that allows you to work for several hours
without a connection to a power supply. When you're on the road your Pocket PC is supplied with
power by the integrated battery. At your home or office you can recharge the battery in the cradle.
You can also take along the power adapter and connect your Pocket PC directly to an electrical
outlet to recharge the battery when you're on the go.
In this chapter you'll learn how to charge the battery and use it most efficiently for mobile operation.
In addition, you'll find important information on transporting your Pocket LOOX 610 and explanations
on what you should watch when travelling with your Pocket PC in this chapter.
Using battery
Charging the battery
The battery is not charged at the time of delivery. Therefore, install the battery on your Pocket
LOOX and charge it for 12 hours before the first mobile use.
You have two ways of doing this:
Ê Connect the Pocket PC directly to an electrical outlet with the power adapter.
Ê Connect the cradle to an electrical outlet via the power adapter and place the Pocket PC in the
cradle.
In both cases you can work with the Pocket PC during charging. This extends the charging time
slightly.
i
During charging the LED (24) flashes green. When the battery is fully charged, the LED
lights continuously green.
Charging battery in cradle
i
In the following text the letters and numbers after the designations for the various cables
refer to the illustration Delivery scope in your "Getting Started“ manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
Ê Connect the power adapter cable (F) to the DC socket (7) of the cradle (8).
Ê Connect the power cable (F) into the power adapter (F).
Ê Plug the power cable (B) into a mains outlet.
Ê Place the Pocket PC in the cradle (C).