User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Operating pocket LOOX 610
A26391-K139-Z120-1-7619 27
Charging battery in cradle
i
In the following text the letters and numbers after the designations for the various cables
refer to the illustration Delivery scope in your "Getting Started“ manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
Ê Connect the power adapter cable (F) to the DC socket (7) of the cradle (C).
Ê Connect the power cable (F) into the power adapter (F).
Ê Plug the power cable (F) into a mains outlet.
Ê Place the Pocket PC in the cradle (C).
Please take note of the information on the power adapter in the "Connecting the power adapter"
chapter.
Using cradle for data synchronisation
i
In the following text the letters and numbers after the designations for the various cables
refer to the illustration Delivery scope in your "Getting Started“ manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
Please note that you have to install the program ActiveSync on your notebook/PC before you carry
out the first data synchronisation between the Pocket LOOX 610 and notebook/PC. You will find
more information on this in chapter "Synchronising data with ActiveSync".
Ê Connect the power adapter cable to the DC socket (7) of the cradle (C).
Ê Connect the power cable (F) into the power adapter (F).
Ê Connect the ActiveSync cable (E) to the connection for the ActiveSync cable (6).
Ê Connect the other end of the ActiveSync cable to the USB port of your notebook or PC.
A serial ActiveSync cable for connection to serial ports of notebooks/PCs is available as an
accessory.
Ê Plug the power cable into a mains outlet.
Ê Switch your notebook or PC on.
Ê Place the Pocket PC in the cradle (C).
If you have already installed ActiveSync on your PC, you can now synchronise the data of your
Pocket PC with the data on your PC.
i
You can always leave the connections between the cradle and power adapter, and
between the cradle and your notebook or PC so that you only need to place your Pocket
PC in the cradle to charge the battery and for data synchronisation.
You can also connect your Pocket PC directly to your notebook or PC with the
ActiveSync cable.
You will find more information on data synchronisation in chapter "Synchronising data with
ActiveSync" and in the help file on your Pocket LOOX.