User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Operating pocket LOOX 610
16 A26391-K139-Z120-1-7619
Switching Pocket PC off and on
After the initial start-up, you usually switch the Pocket LOOX 610 into the Suspend mode when not
in use. It is only practical or necessary to switch off the Pocket PC completely with the Full Reset
switch. In the following sections we will first explain operation in the Suspend mode, and then the
ability to restart the Pocket LOOX 610 with a soft or full reset.
Switch on and off in Suspend mode
Switching off with Suspend button
Ê Press the Suspend button (11) briefly to switch off the Pocket PC.
i
If you have specified a switch-off time with the system settings, your Pocket PC will
automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC:
Switching on with Suspend button
Ê Briefly press the Suspend button (11) to switch on the Pocket PC.
The application you have just been working on or the Today screen appears on the screen when
you have not used your Pocket PC for at least four hours.
The application you were working on before you switched off the Pocket PC with the Suspend
button appears on the screen. The Today screen appears if you switch on your Pocket PC again
with the Suspend button after more than four hours.
Switching on with application buttons
By default, you can also switch your Pocket LOOX on by briefly pressing one of the application
buttons (12, 14, 15, 16). The applications assigned to the respective button appears on the screen.
The applications CONNECT2AIR, Today, Contacts and Calendar are preset. However, you can change
the applications to be called up at any time according to your needs (see the "Configuring Pocket
LOOX 610“ chapter) so that your preferred program opens immediately at the press of a button.
i
By making the appropriate setting in FSC KeyLock (see chapter "Configuring Pocket LOOX
610"), you can also prevent the Pocket PC from being switched on when an application
button is pressed.