User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Operating pocket LOOX 610
A26391-K139-Z120-1-7619 11
789
6
10
11
13452
1 = Stylus
2 = Slot for expansion cards (CF Type I and II)
3 = Slot for expansion cards (SD)
4 = Eject button
5 = Headphones port
6 = Battery
7 = Connection for ActiveSync cable
8 = DC jack (DC IN)
9 = Locking catch
10 = Battery interlock
11 = Full Reset switch
Initial start-up
Only a few steps are necessary to put your new Pocket PC into operation for the first time:
• Remove stylus from Pocket PC
• Carry out a full reset
• Install the battery
• Connecting the power adapter
• Carry out the initial start-up
You will learn more about the individual steps in the following sections.