User Manual
Table Of Contents
- Title
- Contents
- May I introduce myself?
- Information before you start
- Software overview
- Operating pocket LOOX 610
- Overview of operating elements and connections
- Initial start-up
- Switching Pocket PC off and on
- Using standard operating elements
- Adjusting display lighting
- Making sound recordings
- Using the cradle
- Synchronising data with ActiveSync
- Backing up data with FSC Backup
- Panning instead of scrolling with FSC Panning
- Inserting and removing expansion cards
- Pocket LOOX 610 in mobile use
- FSC SpeedMenu - Operating pocket LOOX 610 quickly with one hand
- Configuring Pocket LOOX 610
- Connecting and networking Pocket LOOX 610 with other devices
- Accessories and additional components
- Troubleshooting and tips
- Installing new software
- Date or time of the Pocket PC is incorrect
- The display of the Pocket PC remains dark
- The information on the display of the Pocket PC is difficult to read
- The Pocket PC switches off
- The Pocket PC does not start after switch on
- The Pocket PC stops working
- The battery discharges too quickly
- The Suspend button does not respond properly
- No sound or minimal volume
- Contact with hotline/help desk
- Technical data
- Index
Information before you start
6 A26391-K139-Z120-1-7619
Battery storage
Store the Pocket PC in a fully charged state. The Pocket PC should be stored in a dry area at a
temperature between -20°C and +60°C. The lower the temperature at which the batteries are stored,
the lower is the rate of self-discharge. Avoid leaving your Pocket PC lying in direct sunlight in a car.
If you want to store your Pocket PC unused for a longer time (longer than two months), charge the
battery 100% beforehand. Please note that batteries discharge themselves over time. Therefore,
recharge the battery of your Pocket PC at regular intervals during the storage period.
Cleaning Pocket LOOX 610
Ê Switch the Pocket PC off.
Ê Pull the power plug of the network adapter out of the mains outlet.
!
Do not clean any interior parts yourself; leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Please ensure that no liquid enters the Pocket PC.
Wipe the casing with a dry cloth.
If it is very dirty, you can clean the casing and the display with a damp cloth.