PREFACE Thank you for purchasing the MB2144-226-01 (QFP-48*1 probe header for MB89R907A series). The MB2144-226-01 probe header connects an emulator for the F2MC*2-8L to a user system. The MB2144-226-01 is used with the MB2144-210A (sold separately) universal cable assembly. This manual explains the handling and operation of the probe header (MB2144-226-01). Read this manual carefully before using these products. *1: The FPT-48P-M13 is the package for the probe and probe header.
• The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. • The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of Fujitsu semiconductor device; Fujitsu does not warrant proper operation of the device with respect to use based on such information.
1. Checking the Delivered Product and Accessories Before using the MB2144-226-01, confirm that the following components are included in the product package. • MB2144-226-01 (probe header) : 1 • TQSOCKET048SAW*: 1 • TQPACK048SA* : 1 • Operation manual in Japanese: • Operation manual in English (this manual): 1 1 *: Manufactured by Tokyo Eletech Corporation. 2.
3. Using the Products ■ Setting the jumper plug to switch the C terminal The jumper plug for switching the C terminal on the probe header is used to switch the C terminal capacitive-termination. A 0.1 µF capacitor is mounted on the probe header to perform C terminal capacitive-termination. Depending on the operating environment, change the setting of the jumper plug to select whether C terminal capacitive-termination is performed on a user system or on the probe header.
■ Connecting the universal cable assembly To connect the universal cable assembly and the probe header, connect the two 34-pin connectors of the universal cable assembly and the two 34-pin connectors on the probe header. The connectors on the universal cable assembly, and the mounting section of the connectors on the probe header are marked "A" and "B" to distinguish the connections.
■ Connecting the probe header to a user system To connect the probe header and the user system, connect the probe header to the TQSOCKET048SAW* mounted on the user system using the TQPACK048SA*. An index mark (one corner of the TQSOCKET048SAW or TQPACK048SA is clipped) indicates the first pin on the TQSOCKET048SAW and on the TQPACK048SA. Mount the probe header by using the index marks to align the first pins. *: The TQSOCKET048SAW and the TQPACK048SA are supplied with the product.
4. Note on Using the MB2144-226-01 CN737 PT C2 CN8 38 36 CN2 CN1 1 2 47 C1 48 C S1 A limit exists on the height of components to be mounted on the user board around the probe header to ensure connection between the probe header and the user system. Take this limit into consideration when designing a PC board for the user system. 11 12 CN6 26 CN5 25 36 mm B CN4 14 CN3 13 24 23 A CN2 CN1 56 mm Approximately 15 mm* *: The height differs slightly depending on how the socket is engaged.
6
SS01-25008-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM F2MC-8L QFP-48 PROBE HEADER for MB89R907A MB2144-226-01 OPERATION MANUAL May 2003 the first edition Published FUJITSU LIMITED Edited Business Promotion Dept.
