User's Manual

Using a Proxy Server for the Internet Connection (iX1500)
Configure the Internet connection via a proxy server.
The setting for using a proxy server can be configured when [Access point connection] is selected
for [Wi-Fi connect mode].
1. Click the ScanSnap Manager icon in the notification area located at the
far right of the task bar and select [Exit] from the "Right-Click Menu" (page
86).
a ScanSnap Manager exits.
2. Press
on the touch panel of the ScanSnap to display the [Settings]
screen.
3. Press
to display the [Wi-Fi settings] screen.
4. Press [Access point connection] to display the [Access point connection]
screen.
5. Press [Proxy Server] to display the [Proxy Server] screen.
6. Turn on [Use of Proxy Server].
7. Press the input field for [Host Name/IP address], enter the host name or the
IP address, and press [OK].
8.
Press the input field for [Port Number], enter the port number, and press
[OK].
9. When the proxy server requires authentication, turn on [Authentication] and
perform the following operations.
1. Press the input field for [User name], enter the user name and press [OK].
2. Press the input field for [Password], enter the password, and press [OK].
10. Press
to return to the home screen.
Access Point Connect Settings (iX1500)
168