User's Manual

Changing the Connection Method from Direct Connection to
Access Point Connection (iX1500)
When a computer or mobile device is connected to the ScanSnap directly, change the connection
method for the computer or mobile device to an access point connection and connect the computer
or the mobile device to the ScanSnap via a wireless access point.
This section explains the procedure to change the connection method for the computer and the
ScanSnap from a direct connection to an access point connection.
1. Set [Wi-Fi connect mode] to [Access point connection] for the ScanSnap.
1. Click the ScanSnap Manager icon
in the notification area located at the far right of
the task bar and select [Exit] from the "Right-Click Menu" (page 86).
a ScanSnap Manager exits.
2. Press
on the touch panel of the ScanSnap to display the [Settings] screen.
3. Press to display the [Wi-Fi settings] screen.
4. Press [Wi-Fi connect mode] to display the [Wi-Fi connect mode] screen.
5. Select [Access point connection].
6.
Press to return to the [Wi-Fi settings] screen.
2. Connect the ScanSnap to a wireless access point.
1. Press [Access point connection] to display the [Access point connection] screen.
2. Press [Access point connect settings] to display the [Connection information configuration
method] screen.
3. Select [Select an access point].
4. Press the [Next] button to display the [Select network] screen.
5. From the list of wireless access points that appears, select a wireless access point that you
want to connect to.
6. Press the [Next] button to display the [Enter connection information] screen.
7. Enter the information of the wireless access point to be used and press the [Next] button.
The items which are displayed in the screen differ depending on the security protocol of the
wireless access point.
Changing the Wireless LAN Connection Method (iX1500)
156