User's Manual

Checking the MAC address of the ScanSnap (iX1500)
Check the MAC address of the ScanSnap on the touch panel.
1.
Click the ScanSnap Manager icon in the notification area located at the
far right of the task bar and select [Exit] from the "Right-Click Menu" (page
86).
a ScanSnap Manager exits.
2. Press
on the touch panel of the ScanSnap to display the [Settings]
screen.
3. Press to display the [Wi-Fi settings] screen.
4. Check that [Wi-Fi connect mode] is set to [Access point connection] or
[Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access
point connection] or [Direct connection]
5. Press [Wi-Fi information] to display the [ScanSnap information] screen.
6. Check the [MAC address] in the [Network] tab.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1500)
150