User Manual

Proxy Server
Enable
Set this item to use a proxy server.
[Enable] is set to off as the factory default.
When [Enable] is set to on, specify the following items:
● Host Name/IP address
● Port Number
The factory default setting is "8080".
Authentication
Specify whether or not authentication is necessary for a proxy server.
[Authentication] is set to off as the factory default.
When [Authentication] is set to on, specify the following items:
● Username
● Password
PaperStream NX Manager
Configure the settings for PaperStream NX Manager.
Set this item to use PaperStream NX Manager.
PaperStream NX Manager
Enable
Specify whether to use PaperStream NX Manager.
[Enable] is set to off as the factory default.
When [Enable] is set to on, specify the following items:
● Host Name/IP address
● Port Number
The factory default setting is "20447".
[Check connection] button
Check if the scanner is connected to PaperStream NX Manager.
Auto Login/Logout
Specify an auto login method or set the auto logout time for PaperStream NX Manager.
Auto Logout minutes
Specify a time (minutes) to automatically log out from PaperStream NX Manager if the
scanner is left on for a certain period of time without being used.
● Disabled (Never)
This is the factory default setting.
● 1
Scanner Settings (Touch Screen)
228