User Manual

DNS Server

Enable

When you set an IP address manually, specify a DNS server.

[Enable] is set to off as the factory default.

When [Enable] is set to on, specify the following items:

● Primary DNS

● Secondary DNS

Wi-Fi Diagnosis

Check the Wi-Fi connection status for the scanner.

[Diagnosis] button

The diagnosis is displayed.

Wired LAN

Configure the settings for wired LAN.

You can configure the setting when selecting [Wired LAN] for [How to connect].

IP Address

Obtain IP Address

Set an IP address for the scanner.

● Obtain automatically (DHCP)

This is the factory default setting.

● Configure manually

When [Configure manually] is selected, specify the following items:

● IP Address

● Subnet Mask

● Default Gateway