User Manual

Setting Items Description
Network Encryption (page
229)
Specify whether to encrypt network communications.
Check connection (Ping)
(page 229)
Check the communication status between the scanner
and the connected computer.
Paper Source/Feeding
(page 230)
Pre-Pick (page 230) Enable this to shorten the scanning time when
scanning continuously.
Retry Paper Feeding
(page 230)
Specify the number of feeding retries when a
document is not fed from the ADF paper chute
(feeder).
Multifeed Detection (page
230)
Configure the settings to detect overlapped
documents during a scan.
Multifeed Detection Area
(page 232)
Specify an area to detect overlapped documents.
Intelligent Multifeed
Detection (page 233)
Configure the setting to automatically ignore certain
patterns of overlapped documents when the setting
to detect overlapped documents is enabled.
Manual Feeding (page
234)
Configure the settings when manually loading and
scanning one sheet at a time.
High Altitude Mode (page
234)
Enable this mode to use the scanner at an altitude of
2,000 m or higher.
Paper Protection (page
236)
Paper protection (page
236)
Configure the setting to detect feeding errors.
Paper Protection (Touch
Screen Settings) (page
237)
Enable this option when you want some settings to
be prioritized over the settings for [Paper Protection]
and the Software Operation Panel.
Prioritize the touch screen
settings (page 237)
Image (page 239) Automatic Page Size
Detection (page 239)
When the scanner is set to detect the paper size
automatically, specify whether or not to optimize
(round up/down) the fractional part of the scanned
image.
Page Edge Filler Area
(page 239)
Configure the settings to fill in the shadow or streaks
around the edge of the scanned image.
Dropout Color (page 240) You can exclude a color from being scanned by
selecting either red, green, or blue (three primary
colors).
Offset (page 241) Specify a starting position for scanning.
Scanner Settings (Touch Screen)
220