User Manual

Authentication Failed
If the authentication for PaperStream NX Manager fails, the [Error] screen on the touch screen displays the
following code.
M6:AF Authentication failed in Auto Login mode. Check the Auto Login Setting.
Check the message displayed in the [Error] screen, and correct the following settings:
● [Auto Login] setting on the scanner
● Authentication setting for PaperStream NX Manager
To check the network settings for the scanner, press the [Set] button.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Or, make an inquiry by referring to the contact information at the Contact for Inquiries section in
Safety Precautions bundled with this product.
Troubleshooting
157