User Manual

Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
45
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
Paper Size
The following paper sizes can be scanned:
A: 50.8 to 216.0 mm (2.0 to 8.5 in.)
B: 54.0 to 355.6 mm (2.1 to 14.0 in.) (*1)
C: 54.0 to 216.0 mm (2.1 to 8.5 in.)
D: 50.8 to 355.6 mm (2.0 to 14.0 in.) (*1)
*1: Long page scanning supports documents with a length of up to
5,588 mm (220 in.) when the scanning resolution is set to 200 dpi
or less.
Conditions
Paper type
The following paper types are recommended:
z Wood-free paper
z Wood-containing paper
z PPC paper (recycled)
z Plastic card
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper weight (thickness)
The following paper weights can be used:
z 27 to 413 g/m
2
(7.2 to 110 lb)
z 127 to 209 g/m
2
(34 to 56 lb) for A8 size
z 1.4 mm or less for plastic cards (*1)
*1: Up to 1.25 mm is supported for scanning at 300 dpi or less (80 ppm)
in landscape when using the fi-7180/fi-7280.
This setting can be changed in the Software Operation Panel to scan
plastic cards with a thickness up to 1.4 mm.
For details, refer to "Scanning Thick Plastic Cards [Feed Mode] (fi-
7180/fi-7280)" (page 194).
2.3 Documents for Scanning (ADF)
A
B
Feed
direction
C
D
Feed
direction
Portrait
Landscape