User manual

Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
74
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
■Checking and resetting the sheet counter
1 Press the [Power] button on the operator panel.
 The [Ready] screen is displayed on the LCD.
2 Press the [Menu] button.
 The [Settings Menu] screen is displayed on the LCD.
3 Press the [] or [] button and select [4: Consumable
counters], then press the [Scan/Enter] button to confirm.
 The [Consumable counters] screen is displayed on the LCD.
4 Press the [] or [] button and check the counter.
Counters are highlighted when consumable replacement or cleaning
is required. The counter will appear highlighted when:
z The page count after replacing the consumable reaches 95% of the
value configured in "Replacement Cycle of Consumables [Life
Counter Alarm Setting]" (page 181) in the Software Operation
Panel. (For brake roller/pick roller counters)
z The page count after cleaning reaches 100% of the value
configured in "Scanner Cleaning Cycle [Cleaning Cycle]" (page
181) in the Software Operation Panel. (Cleaning counter)
z The amount of remaining ink reaches below 33%. This is only
displayed when the imprinter is installed. (For ink counter)
5 After replacing the consumables or cleaning, select the
highlighted counter with the [] or [] button, and press
the [Scan/Enter] button.
 A message appears to confirm that you want to clear the counter.
6 Select [1: Yes] by the [] or [] button, and press the
[Scan/Enter] button to confirm.
 The counter is reset to 0.
For ink counter, the value will be set to 100.
Menu
Scan/Enter
Check
Power
Stop/Clear
2 [Menu] button
3 []/[] button
[Scan/Enter] button
4 []/[] button
1 [Power] button
5 []/[] button
[Scan/Enter] button
6 []/[] button
[Scan/Enter] button
HINT
The total number of sheets that have been scanned after purchase
is displayed in the total sheets scanned counter. The total sheets
scanned counter cannot be cleared.