User manual

Contents

Index

Chapter 2 How to Load Documents

Appendix

Glossary

Introduction

TOP

Configuring the

Scan Settings

How to Use the

Operator Panel

Various Ways to

Scan

Daily Care

Troubleshooting

Operational

Settings

Replacing the

Consumables

Scanner

Overview

How to Load

Documents

Fig. 1

ATTENTION

z The above condition applies when the document is set to the center

of the pick roller width.

z When you use detection by overlapping, scanning thick documents

such as plastic cards will be falsely detected as multifeed.

In that case, to scan documents successfully, use the multifeed

window display function of the scanner driver, use the Intelligent

Multifeed function, or disable the multifeed detection.

( Unit: mm)

Top

Reference point

Front side

Feed

direction

Bottom

Center

HINT

z Accuracy of multifeed detection may drop with some documents.

Multifeed cannot be detected for the top 30 mm of a document.

z For the shaded area in Fig. 1, you can also specify a length not to

detect multifeeds in the Software Operation Panel.

For details, refer to "9.6 Settings Related to Multifeed Detection"

(page 195).