User manual

Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
193
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
3 Select a paper protection detection method which you
want to change the sensitivity level for.
Feeding Accuracy :Select this to detect a document that is
unusually warped when a feeding error occurs.
This is available when you have selected
[Feeding Accuracy] or [Feeding Accuracy &
Noise] for the paper protection detection
method.
Feeding Noise :Select this to detect paper jam noise.
This is available when you have selected
[Feeding Noise] or [Feeding Accuracy & Noise]
for the paper protection detection method.
4 Specify the sensitivity level.
Low: Decreases the sensitivity level to detect warped documents or
paper jam noise.
Normal: Monitors warped documents or paper jam noise in normal
sensitivity.
Keep this setting for normal use.
High: Increases the sensitivity level to detect warped documents or
paper jam noise.
HINT
z To detect paper warp or paper jam noise faster and stop the
scan, select [High].
z To decrease the frequency of paper jam detection if paper jams
occur frequently in the feeder, select [Low].
z This setting can also be configured in the operator panel. When
the operation panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation Panel setting.