- FUJITSU 42" WIDE PLASMA DISPLAY USER'S MANUAL P42HHS30E

ManualsBrandsFujitsu ManualsFlat Panel TVP42HHS30E

Before using the display, read this manual carefully so that you know how to use the display correctly.

Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the

safety precautions.

Keep this manual where the user can see it easily.

* Installation and removal require special expertise. Consult your product dealer for details.

Contents

• Safety Precautions ······················································E-2–E-3

• Accessories ········································································ E-4

• Handy Tips ·········································································· E-4

• Installation ·········································································· E-5

• Part Names and Functions ·········································E-6–E-7

• Connecting the Display to External Equipment ·············· E-8

• Options ··············································································· E-9

• Specification ····································································· E-10

• Cleaning and Maintenance ············································· E-11

Page

English

USER’S MANUAL

42” WIDE PLASMA DISPLAY

P42HHS30E

E-MHD00833(hyo1).p65 03.10.17, 11:41 AMPage 2 Adobe PageMaker 6.5J/PPC

Summary of content (11 pages)

PAGE 1
English USER’S MANUAL 42” WIDE PLASMA DISPLAY P42HHS30E Contents • • • • • • • • • Page Safety Precautions ······················································ E-2–E-3 Accessories ········································································ E-4 Handy Tips ·········································································· E-4 Installation ·········································································· E-5 Part Names and Functions ········································· E
PAGE 2
SAFETY PRECAUTIONS IMPORTANT INFORMATION IMPORTANT The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PAGE 3
– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. – Do not use attachments not recommended by the product manufacturer as they may cause hazards. – Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire, electric shock, or other hazards. – The apparatus shall not be exposed to dripping or splashing.
PAGE 4
ACCESSORIES CHECKING ACCESSORIES One user’s manual One System cable One System cable (picture) (audio) One power cable Two ferrite cores Manual HANDY TIPS • Have the display inspected and cleaned by your dealer at regular intervals. • Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be sure to use a screen orbiter, white screen.
PAGE 5
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select.
PAGE 6
PART NAMES AND FUNCTIONS FRONT (Right section) 1 Power indicator lamp This lamp shows the state of the power supply. Lit (red): Stand-by Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction.) 2 Remote control signal receiver Receives signals from the remote control.
PAGE 7
English LOWER PART ① ② 1 ③ ④ ⑤ power switch When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state, the power indicator lamp goes out and the display is placed in the “OFF” state.
PAGE 8
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information. RECEPTACLE Make sure that the power cable’s grounding wire is grounded. The display comes with a 3-prong power plug; one prong is connected to the grounding wire.
PAGE 9
Wall-mounting Bracket 0° to 15° mounting angle P-WB4201 Ceiling unit 0° to 15° mounting angle P-CT4200 English OPTIONS Desktop Stand unit P-TT4200 Speaker P-SP4200 (1 set of 2 speakers) Desktop Speaker Stand P-ST4200 (1 set of 2 speakers stands) * When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met. * The colours of options do not match the display colours perfectly.
PAGE 10
SPECIFICATION Model P42HHS30E Screen size 42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) Aspect ratio 16:9 (wide) Weight 30 kg / 66 lbs Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm / 40.8 (W) x 25.3 (H) x 3.3 (D) inch (does not include outer projections) Power supply 110–240 VAC 50/60 Hz Current rating 4.0–1.
PAGE 11
Precautions Cleaning the Cabinet and Remote Control Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections. Use a soft cloth for cleaning.