Computer Drive User Manual

Chapter 1 Installing ETERNUSmgr

> 1.6 Procedure

ETERNUS Disk storage systems ETERNUSmgr Install Guide for Linux

P2U3-0022-04ENZ0

Procedure

1 Select the type of target device.

The character string for the selected device is assigned to the "TARGET_TYPE"

parameter in the setup file ("STXPOLL_1.INI"), while a device type flag

(1=ETERNUS3000/GR710/GR720/GR730, 2=ETERNUS6000/GR740/GR820/GR840,

4=ETERNUS DX400 series

/ETERNUS DX8000 series/ETERNUS2000/ETERNUS4000/

ETERNUS8000) is assigned to the "TARGET_FLAG" parameter.

For an ETERNUS DX410/DX440, select "1" (=ETERNUS DX400 series). For an ETER-

NUS DX8100/DX8400/DX8700, select "2" (=ETERNUS DX8000 series).

(message displayed)

# Select target type.

# 1=ETERNUS DX400 2=ETERNUS DX8000 3=ETERNUS2000 4=ETERNUS3000

5=ETERNUS4000 6=ETERNUS6000 7=ETERNUS8000 8=GR710 9=GR720 10=GR730

11=GR740 12=GR820 13=GR840

([1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13] default: 1=ETERNUS DX400)

2 Enter the URL.

Enter the URL for the directory in which ETERNUSmgr Top Menu is located. (The default

setting is "/opt/FJSVgrmgr/www".) (This URL is assigned to the ETERNUSmgr Top Menu

directory by the Web server settings.)

Enter the URL starting with "http://" and finishing with the alias name.

(message displayed)

# Input your www server URL.

# (default: http://)

3 Enter the Target Address.

a Enter the Target Address allocated to the device.

The value entered here is set to the "TARGET_ADDR" parameter of the

"STXPOLL_1.INI" file. Specify the IP address of the SVP when using SVP with the

ETERNUS6000.

(message displayed)

# Input target address (TARGET_ADDR).

# (default: 0.0.0.0)

4 Set the ETERNUSmgr e-mail notification function.

When the ETERNUSmgr e-mail notification function is to be used, set as follows:

a Enter the ETERNUSmgr Admin Mail Address.

ETERNUSmgr will send messages to the mail address entered here when a change of

status occurs in the device.

The value entered here is set to the "ADMIN_MAIL" parameter in the "STXPOLL_1.INI"

file.

(message displayed)

# Input ETERNUSmgr administrator mail address (ADMIN_MAIL).

# (default: root@domain-name)