User's Manual
Table Of Contents
- Preface
- Getting to Know Your Tablet PC
- Getting Started with Your Tablet PC
- User-Installable Features
- Troubleshooting Your Tablet PC
- Care and Maintenance
- System Specifications
- Appendix A: WLAN User’s Guide
- Appendix B: Fingerprint Sensor Device
- Index
51
- Lithium Polymer Battery
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
1 Plug an AC Adapter into the system and connect it to a power outlet.
2 Follow steps 3 through 5 in “Cold Swapping Batteries”.
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE BATTERY PRESENT TO SUPPORT THE SYSTEM
WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.
I
F THE LITHIUM POLYMER BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR TABLET PC OR CHARGE YOUR BATTERY.