Datasheet

Fibre Channel Interface
1-60 C141-C008
Word xx and byte y of the payload are represented by [PL:Wxx/By].
(1) LS_Command code [PL:W00/B0]
52h: Indicates ADISC.
02h: Indicates ADISC_ACC.
(2) Hard Address of Originator [PL:W01/B1-3]
− For ADISC, the initiator sets the address set by the SEL signal in the low
order 8 bits.
− For ADISC_ACC, the drive sets the address set by the SEL signal in the
low order 8 bits.
(3) Port name [PL:W02-03]
− For ADISC, Port_name of the initiator is set in Port name of Originator.
− For ADISC_ACC, Port_name of the drive is set in Port name of
Responder.
(4) Node name [PL:W04-05]
− For ADISC, Node_name of the initiator is set in Node name of
Originator.
− For ADISC_ACC, Node_name of the drive is set in Node name of
Responder.
(5) N_Port ID [PL:W06]
− For ADISC, Port_ID of the initiator is set in N_Port ID of Originator.
− For ADISC_ACC, Port_ID of the drive is set in N_Port ID of Responder.