Datasheet

Fibre Channel Interface
1-54 C141-C008
(5) Establish Image Pair [Byte6/bit5]
1b: The drive establish connection with the initiator.
0b: The drive responds with ACC but does not establish connection with the
initiator.
− The drive responds with the value specified by PRLI.
(6) Response Code [Byte6/bit3-0]
1h: Request executed.
− The drive responds with 1h by ACC when PRLI is executed.
(7) Originator Process Associator [Byte8-11]
00000000h: The drive does not support this field and responds with 0000h
by ACC.
(8) Responder Process Associator [Byte12-15]
00000000h: The drive does not support this field and responds with 0000h
by ACC.
(9) Service Parameters [Byte19]
a) 0b: Data Overlay Allow [bit6]
− The drive does not support this field and responds with 0b by ACC.
b) 0b: Initiator Function [bit5]
− The drive responds with 0b by ACC.
c) 1b: Target Function [bit4]
− The drive responds with 1b by ACC.
d) 0b: Command/Data Mix Allowed [bit3]
− The drive does not support this bit and responds with 0b by ACC.
e) 0b: Data/Response Mix Allowed [bit2]
− The drive does not support this bit and responds with 0b by ACC.
f) 1b: Read Transfer Ready Disable [bit1]
− The drive responds with 1b by ACC.
g) 0b: Write Transfer Ready Disable [bit0]
− The drive responds with 0b by ACC.