Datasheet

Fibre Channel Interface
1-52 C141-C008
(5) Establish Image Pair [PL:Byte6/bit5]
1b: The drive establish connection with the initiator.
0b: The drive responds with ACC but does not establish connection with the
initiator.
(6) Originator Process Associator [PL:Byte8-11]
00000000h: The drive neither supports nor checks this field.
(7) Responder Process Associator [PL:Byte12-15]
00000000h: The drive neither supports nor checks this field.
(8) Service Parameters [PL:Byte19]
a) 0b: Data Overlay Allow [bit6]
− The drive neither supports nor checks this field.
b) 1b: Initiator Function [bit5]
− The drive does not check this bit and operates assuming that 1b has
been specified.
c) 0b: Target Function [bit4]
− The drive does not check this bit.
d) 0b: Command/Data Mix Allowed [bit3]
− The drive neither supports nor checks this bit.
e) 0b: Data/Response Mix Allowed [bit2]
− The drive neither supports nor checks this bit.
f) 1b: Read Transfer Ready Disable [bit1]
− The drive does not check this bit and operates assuming that 1b has
been specified.
g) 0b: Write Transfer Ready Disable [bit0]
− The drive does not check this bit and operates assuming that 0b has
been specified.