Datasheet

Fibre Channel Interface
1-48 C141-C008
b) X_ID interlock [Byte4/bit5]
− This field is invalid for Class 3 and the drive ignores it.
c) 00: Error Policy [Byte4/bit4-3]
− The drive supports Discard Policy only and responds with
LS_RJT(03h, 05h) when (this bit) ≠‚00b.
− Drive responds with 00b in this field.
d) 00: Categories per Sequence [Byte4/bit1-0]
− The drive does not check this field but supports only one category
per sequence.
− Drive responds with 00b in this field.
(5) Receive data field Size [Byte6-7]
− The drive responds with LS_RJT (03h, 07h) when 256 = < (this field) =
< 2112 not a multiple of 4.
− The drive responds with the value of the receive data field size of class 3
parameter of PLOG1 by ACC.
(6) Concurrent Sequence [Byte9]
− The drive ignores this field.
− Drive responds with FFh in this field.
(7) N_Port End-to-end Credit [Byte10-11]
− This field is invalid for Class 3 and the drive ignores it.
(8) Open Sequence per Exchange [Byte13]
− The drive responds with LS_RJT (03h, 01h) when (this field) = 0.
− For ACC, the drive responds with 01.