Datasheet

1.7 Extended Link Service
C141-C008 1-45
b) 0b: Random Relative Offset [bit6]
− The drive does not check this bit and does not support this function.
− For ACC, the drive responds with 0b.
c) 0b: Valid Vendor Version [bit5]
− The drive does not check this bit and does not support this function.
− For ACC, the drive responds with 0b.
d) 0b: N_Port/F_Port [bit4]
− The drive responds with LS_RJT (03h, 0Fh) when (this bit) = 1b.
− For ACC, the drive responds with 0b.
e) 1b: Alternate BB_Credit Management [bit3]
− The drive responds with LS_RJT (03h, 0F) when (this bit) = 0.
− For ACC, the drive responds with 1b.
f) E_D_TOV Resolution [bit2]
− The drive does not check this field.
− For ACC, the drive responds with 0b.
g) Dynamic Half Duplex [bit2]
− The drive does not check this field.
− For ACC, the drive responds with 0b.
h) Continuous Increase SEQ_CNT [bit1]
− The drive does not check this field.
− For ACC, the drive responds with 0b.
i) Payload Length [bit0]
− The drive does not check this field.
− For ACC, the drive responds with 0b.
(5) Receive Data Field Size [Byte6-7]
− The drive responds with LS_RJT (03h, 07h) when 256 = < (this field) =
< 2112 not a multiple of 4.
− The drive responds with the value of the receive data field size of class 3
parameter of PLOG1 by ACC. (2048)