Datasheet

Fibre Channel Interface
1-16 C141-C008
Table 1.8 lists signal assignments on the connector.
Table 1.8 FC-SCA connector: CN1
Pin No. Signal Signal Pin No.
01 –EN bypass port A +12V charge 21
02 +12V GND 22
03 +12V GND 23
04 +12V +PortA_in 24
05 –Parallel ESI –PortA_in 25
06 –Drive present GND 26
07 Active LED out +PortB_in 27
08 Power_Control –PortB_in 28
09 Start_1/Mated GND 29
10 Start_2/Mated +PortA_out 30
11 –EN bypass port B –PortA_out 31
12* SEL_6 –DSK_WR GND 32
13* SEL_5 –DSK_RD +PortB-out 33
14* SEL_4 –ENCL_ACK –PortB-out 34
15* SEL_3 D(3) GND 35
16 Fault LED out SEL_2 D(2) 36*
17 DEV_CTRL_CODE_2 SEL_1 D(1) 37*
18 DEV_CTRL_CODE_1 SEL_0 D(0) 38*
19 +5V DEV_CTRL_CODE_0 39
20 +5V +5V charge 40
* Signal names in the right column of the table are those in parallel ESI
operation.