Datasheet

4.1 Control/Sense Commands
C141-C008 4-67
k. ORIGINATOR CMR (not supported)
This field specifies the minimum number of MCM circuits for each port that
is an IDD originator.
The value specified in this field is ignored, and the default value X'00' is
always valid for operation.
l. RESPONDER CMR (not supported)
This field specifies the minimum number of MCM circuits for each port that
is an IDD responder.
The value specified in this field is ignored, and the default value X'00' is
always valid for operation.
m. MCM_TOV (MCM Time Out Value) (not supported)
This field indicates the minimum time (ms) that the MCM state is in effect
before the MCM device ECMC is transmitted.
The value specified in this field is ignored, and the default value X'0000' is
always valid for operation.
(11) Additional error recovery parameters (page code = 21)
The page descriptor format of this MODE SELECT parameter is shown in Table
4.32.
Table4.32 MODE SELECT parameters: additional error recovery parameters
[Fujitsu unique parameter]
Bit
Byte
7 6 5 4 3 2 1 0
0 0 0 1 0 0 0 0 1
1 X‘02’ (Page Length)
2 0 0 0 0 Number of retries during a Seek Error
Default 0 0 0 0 1 1 1 1
Variable 0 0 0 0 1 1 1 1
3 RFJ
Default 0 0 0 0 0 0 0 0
Variable 0 0 0 0 0 0 0 0