Datasheet

Command Specifications
4-66 C141-C008
Note:
It is prohibited that "1" is specified in DTIPE and PLPB simultaneously.
If DTIPE=PLPB=1 is specified, it responds with CHECK CONDITION
(ILLEGAL REQUEST, VALID FIELD IN THE PARAMETER LIST).
h. RR_TOV UNITS (resource recovery timeout value UNITS) (not supported)
This field specifies the time unit of the RR_ROV field.
The value specified in this field is ignored, and the default value 001b is
always valid for operation.
Table 4.30 RR_TOV UNITS
RR_TOV UNITS RR_TOV time unit
000 Timer is not specified
001 0.001 seconds
011 0.1 seconds
101 10 seconds
i. RR_TOV (resource recovery timeout value) (not supported)
This field specifies the time of RR_TOV.
The value specified in this field is ignored, and the default value X'14' is
always valid for operation.
j. CONTROL_MCM (not supported)
This field specifies the MCM operation.
The value specified in this field is ignored, and the default value 01b is
always valid for operation.
Table 4.31 CONTROL_MCM
CONTROL MCM MCM operation
00 Joins all MCM operations and starts MCM.
01 Does not respond to any MCM primitive.
10 Joins all MCM operations but does not start MCM
11 Reserved