Datasheet

4.1 Control/Sense Commands
C141-C008 4-45
(5) Verify error recovery parameters (page code = 7)
The page descriptor format of this MODE SELECT parameter is shown in Table
4.20.
Table 4.20 MODE SELECT parameters: verify error recovery parameters
Bit
Byte
7 6 5 4 3 2 1 0
0 0 0 0 0 0 1 1 1
1 X‘0A’ (Page Length)
2 (Reserved) EER PER DTE DCR
Default 0 0 0 0 1 0 0 0
Variable 0 0 0 0 1 1 1 1
3 Number of retries during VERIFY.
Default X‘3F’
Variable X‘FF’
4 Correctable Bit Length
Default X‘FF’ (MAT3*** Series) or X’T.B.D’ (MAU3*** Series)
Variable X‘00’
5-9 X‘0000000000’ (Reserved)
10-11 Recovery Time Limit
Default X‘7530’
Variable X‘FFFF’
The error recovery parameters divided in this page descriptor are applicable for
the following commands.
• VERIFY
• WRITE AND VERIFY (verify operation)
(See the
Note.)