Datasheet

4.1 Control/Sense Commands
C141-C008 4-9
j. Product Revision field
The IDD's microcode version number is displayed in ASCII code in this
field.
k. Device Serial Number field
The value following byte 4 of the device serial number in the VPD
information is indicated in this field. Higher order digits which do not
contain valid numbers are filled with ASCII code spaces (X '20').
l. Clocking field
"0" as Reserved.
m. QAS (Quick Arbitrate Supported) bit
"0" as Reserved.
n. IUS (Information unit supported) bit
"0" as Reserved.
o. Version Descriptor field
This field is provided for identifying upto eight standards to which the
Device claims conformance.
The IDD shall be indicated as shown below.
Table 4.4 Version descriptor
BYTE Code Description
58 to 59 0x0D, 0x3C FC-PH
60 to 61 0x0D, 0x61 FC-AL-2
62 to 63 0x13, 0x3C FC-FLA
64 to 65 0x09, 0x00 FCP-2
66 to 67 0x00, 0x40 SAM-2
68 to 69 0x02, 0x60 SPC-2
70 to 71 0x01, 0x9B SBC
72 to 73 0x01, 0xDB SES