Datasheet

Command Specifications
4-8 C141-C008
[Byte 6]
− DualP (Dual port):
Dual port function [1]
− Port:
Connection port, '0'= connect to port A [0/1]
'1'= connect to port B
− ACKBREQB (ACKB/REQB):
Use the ACKB and REQB signals with the B cable or
the Q cable [0]
− Addr32 (Wide SCSI address 32):
32 bit SCSI addressing [0]
− Addr16 (Wide SCSI address 16):
16 bit SCSI addressing [0]
[Byte 7]
− RelAdr (Relative addressing):
Relative logical block addressing [0]
− WBus32 (32-bit wide data transfer):
Data transfer on a 4-byte bus [0]
− WBus16 (16-bit wide data transfer):
Data transfer on a 2-byte bus [0]
− Sync (Scychronous data transfer
Data transfer in the synchronous mode [0]
− Linked (Linked command):
Command link function [0]
− TTD (Target transfer disable):
Target transfer disable message [0]
− CmdQue (Command queuing):
Tagged command queuing feature [1]
− SftRe (Soft Reset):
Soft reset condition [0]
h. Vendor ID field
This field indicates the name of the product's supplier in left-justified
ASCII code, and always indicates FUJITSU. The unused right end is
space for the ASCII code.
i. Product ID field
The product's model name is displayed in left-justified ASCII code in
this field.