Datasheet

Fibre Channel Interface
1-86 C141-C008
101b, Group-5, 12 byte commands
110b, Group-6, Vendor specific
111b, Group-7, Vendor specific
(2) Logical Block Address
It can be specified the logical block address, 21 bit on 6 byte CDB and 32 bit
on 10 byte CDB.
The maximum logical block address of drive is described on the Read
Capacity Command.
(3) Transfer Length
It can be specified by 255 block using 1 byte (in this field) in 6 byte CDB.
It can be specified by 64K-1 block using 2 byte (in this field) in 10 byte
CDB.
(4) Control Byte
This field includes the following informations.
a) NACA
(Normal Auto Contingent Allegiance)
− This drive does not support this bit.
b) Flag
− This drive does not support this bit.
c) Link
− This drive does not support this bit.