Datasheet

Fibre Channel Interface
1-84 C141-C008
e) Clear Task Set [B2/bit2]
− This drive clears all commands queued when this drive receives the
Target Reset.
− The drive generates the UNIT ATTENTION condition internally for
all of initiators except Clear Task Set issue initiator. If the drive
receives the command after Clear Task Set, the drive will respond
check condition (SenseKey=UNIT ATTENTION).
− The drive aborts all of "Open Exchange".
f) Abort Task Set [B2/bit1]
− This drive clears all Task set issued by the initiator of commands
abort-queued when this drive receives the Abort Task Set.
− The drive aborts "Open Exchange".
g) Read Data [B3/bit1]
− In case of the command has the Read data (the data is transferred
from drive to initiator), 1 is set.
h) Write data [B3/bit0]
− In case of the command has the Write data (the data is transferred
from initiator to drive), 1 is set.