Datasheet

Fibre Channel Interface
1-76 C141-C008
(4) Type
01h is used for Extended Link Service.
− F_CTL.. (Frame Control)
− 380000h is set for Initialization frame of Extended Link Service.
(5) SEQ_ID.. (Sequence Identifier)
− The drive does not check this item.
− The drive responds with 00h.
(6) DF_CNTL.. (Data Field Control)
Set 00h because no Optional Header is used.
(7) SEQ_CNT.. (Sequence Count)
− The drive does not check this item.
− The drive responds with 0000h.
(8) OX_ID.. (Originator Exchange Identifier)
FFFFh is set to indicate that OX_ID is unused.
(9) RX_ID.. (Responder Identifier)
FFFFh is set to indicate that RX_ID is unused.
(10) Parameter
Not used by Extended Link Service.
− The drive responds with 0000h.