Server User Manual

Figure 28-29
Securing the cable (cable (SIG))
5.
Support the fan shelf from below with one hand and then insert it carefully
into the chassis.
Arranging the cables in the center makes it easier to install the fan shelf.
6.
Tighten the three screws securing the fan shelf.
7.
Connect the two cables to the fan shelf.
8.
Install the low er cover and then secure it with the one screw.
9.
Install the upper cover.
10.
Slide the right and left stoppers of the upper cover outwards and then secure
the cover with the two screws.
11.
Install all the fan units.
For details, see "19.5 Installing a Fan Unit."
12.
Install the front cover.
For details, see "6.5.3 Installing the front cover."
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013450