Manualshelf

Server User Manual

ManualsBrandsFujitsu ManualsServerM10-4
371372373374375376377378379380
A
Figure 21-9
Removing the crossbar backplane unit
21.5 Installing the Crossbar Backplane Unit
This section describes the procedure for installing the crossbar backplane unit.
1.
Insert the crossbar backplane unit into the chassis and then tighten the five
screws.
2.
Fix the cables of the crossbar backplane unit with the clamps.
3.
Install the guide plate by sliding it towards the rear and then tighten the two
screws.
Chapter 21 Maintaining the Crossbar Backplane Unit of the Crossbar Box 353