Server User Manual

Caution -
Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see "1.5 Notes
Regarding Static Electricity."
Note -
Make a note of the positions of the crossbar cables (optical) before disconnecting them
to ensure that they are reinstalled correctly.
A
A
1.
Remove all crossbar cables (optical) connected to the crossbar unit requiring
maintenance.
For details, see "25.4 Removing a Crossbar Cable (Optical)."
2.
Loosen the two screws (A in the figure) on the right and left sides and lower
the levers to release the crossbar unit.
Figure 16-2
Positions of screws and levers
3.
Hold the levers and partially pull out the crossbar unit.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013302