Server User Manual

A
Note -
Place the removed operation panel on a grounded antistatic ESD mat.
Figure 15-6
Cables and screws of the operation panel
3.
Pull the operation panel forward to remove it.
15.5 Installing the Operation Panel
This section describes the procedure for installing the operation panel.
15.5.1 Installing the operation panel
1.
Set the BB-ID of the operation panel to the value prior to the start of
maintenance.
2.
Place the operation panel in the mounting position and then tighten one
screw.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013290