Server User Manual

Note -
Make a note of the locations of the fan units before removing them to ensure that they
are reinstalled correctly.
12.
Loosen the two screw s in the fan slot and then remove the fan shelf.
Figure 15-4
Screws in the fan slot
15.4.2 Removing the operation panel
1.
Loosen the two screw s securing the PSU backplane unit and partially pull out
the PSU backplane unit.
Figure 15-5
Screws securing the PSU backplane unit
2.
Remove the cable from the operation panel and loosen one screw (A in the
figure).
Chapter 15 Maintaining the Operation Panel 289