Server User Manual

Note -
Place the removed PSU backplane unit on a grounded antistatic ESD mat.
Figure 14-4
Screws in the fan slot
14.4.2 Removing the PSU backplane unit
1.
Loosen the two screw s securing the PSU backplane unit and then partially
pull out the PSU backplane unit.
Figure 14-5
Screws securing the PSU backplane unit
2.
Pull the PSU backpl a ne unit out a little more. Then , remove the unit by hold ing
its handle.
Chapter 14 Maintaining the PSU Backplane Unit 273