Server User Manual

Note -
Make a note of the positions of the power supply units before removing them to
ensure that they are reinstalled correctly.
Note -
Make a note of the locations of the fan units before removing them to ensure that they
are reinstalled correctly.
Note -
Make a note of the positions of the internal disks before removing them to ensure that
they are reinstalled correctly.
6.
Loosen the screw securing the CPU memory unit and then lower the right and
left levers to the horizontal position.
Figure 14-3
Screw securing the CPU memory unit
7.
Pull the CPU memory unit out by about 10 cm (3.9 in.)
8.
Remove the front cover.
For details, see "5.5.3 Removing the front cover."
9.
Remove all the power supply units.
For details, see "10.4 Removing a Power Supply Unit."
10.
Remove all the fan units.
For details, see "11.4 Removing a Fan Unit."
11.
Remove all the internal disks or the HDD filler units.
For details, see "12.4 Removing an Internal Disk."
12.
Loosen the two screws in the fan slot and then remove the fan shelf.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013272