Server User Manual

XSCF>
testsb -v -y -s 00-0
XSCF>
testsb -v -y -s 00-0
7.
Close the rack door.
13.7.2 Active/Hot maintenance (with DR)
1.
Return to the operation of the XSCF firmware replacefru command to confirm
that the chassis has been incorporated into the system.
For details, see "6.1 Incorporating an FRU into the System with the replacefru
Command."
2.
Execute the testsb command to confirm that the PCIe card requiring
maintenance is recognized.
When you enter the "-y" option for the testsb command, the system automatically
answers "y" (yes) in response to an inquiry.
The following example shows the diagnosis of system board 00-0.
During the diagnosis processing, the show-devs command of OpenBoot PROM
is executed, and the result is displayed.
3.
Incorporate into the physical partition the chassis in which the PCIe card
requiring maintenance is mounted.
For details, see "6.2 Incorporating a Chassis into a Physical Partition."
4.
Close the rack door.
13.7.3 Inactive/Hot maintenance
1.
Log in to the XSCF shell.
2.
Execute the testsb command to confirm that the PCIe card requiring
maintenance is recognized.
When you input optional "-y" for the testsb command, the system automatically
answers "y" (yes) in response to an inquiry.
The following example shows the diagnosis of system board 00-0.
3.
Pow er on the physical partition requiring maintenance.
For details, see "6.3 Powering On the Physical Partition Requiring Maintenance."
4.
Close the rack door.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013262