Server User Manual

#
grep " 0 \"ixgbe"\" /e tc/pa th_to _inst
"/pci@8100/pci@4/pci@0/pci@0/network@0" 0 "ixgbe"
#
ldm list-bindings rootdo m
------------------------
Ommitted
------------------------
VDS
NAME VOLUME OPTIONS MPGROUP DEVICE
vds0 vol0 /export/
vdisks/vdisk.img
(*1)
vol1 /dev/zvol/
dsk/rpool/zvdisk1
vol2 /dev/dsk/
cxtxxxxxxxxxxxxxxxxdxsx
CLIENT VOLUME
vdisk1@guest1 vol0
(*2)
vdisk2@guest2 vol1
vdisk3@guest3 vol2
------------------------
Ommitted
-----------------------
c.
If the virtual network switch to which the PCIe card requiring maintenance
is assigned is found in steps a and b, see the [PEER] part of the virtual
network switch displayed in step a. Confirm the part for the virtual network
device and guest domain that use the services of the virtual network
switch.
The display format is "<virtual network device>@<guest domain>."
- For SAS card or FibreChannel card
a.
Execute the ldm list-bindings command from the control domain to check
virtual disk service [VDS] inform at ion for the virtual disk backen d
([DEVICE] value) that is assigned to the virtual disk service.
For information on the types that can be assigned to a virtual disk backend,
see "Virtual Disk Backend" in the Oracle VM Server for SPARC Administration
Guide.
In the following example, "rootdom", the logical domain name to which the
PCIe card is assigned, is specified.
*1: Virtual disk backend
*2: Virtual disk name and guest domain name to which the backend of vol0 is
assigned
b.
Log in to the logical domain to which the PCIe card is assigned to identify
the physical disk from the backend. Then, identify the PCIe card in use
from the physical disk.
For details of the procedure, see documents for the software that manages
respective file system and volume.
For example, suppose that the backend is a file on the ZFS file system. In this
case, ex ec ute the zfs list com m a n d to co nfirm the ZF S stora g e poo l corresponding
to the mount point of the directory in which the file is located. Then, execute
zpool status <zpool name>toconfirmthephysicaldevicepathofthePCIecard
to which a LU or hard disk is connected.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013248