Server User Manual

Note -
Place the removed internal disk on the grounded antistatic ESD mat.
Figure 12-3
Removing an internal disk
3.
Care f u ll y remove the interna l disk from its slot.
4.
When reducing an internal disk, install the the internal disk filler unit in the
slot from which the disk was removed.
12.5 Installing an Internal Disk
This section describes the procedure for installing an internal disk. Perform
expansion using the same procedure.
12.5.1 Installing an internal d isk
1.
When expanding an internal disk, remove the internal disk filler unit from the
slot in which the disk is to be installed.
Chapter 12 Maintaining the Internal Disks 233