Server User Manual

Note -
When performing active/hot maintenance, at this point wait until the motor stops
rotating (about 1 minute).
12.4.1 Accessing an internal disk
1.
Remove the front cover.
For details, see "5.5.3 Removing the front cover."
12.4.2 Removing an internal disk
1.
Push the knob on the internal disk to unlock it and then raise the lever to a
45-degree angle.
Figure 12-2
Knob on internal disk
2.
Hold the lever and pull out the internal disk by about 3 cm (1.2 in.)
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013232