Server User Manual

XSCF>

showlogs error

XSCF>

replacefru

Note -

In the case of a dual power feed, make a note of the locations of the power cords

before disconnecting them to ensure that they are reinstalled correctly.

Caution -

Before you handle any components, wear a wrist strap to ground any static

electricity. If you perform this procedure without a wrist strap, individual

components or the overall system may be damaged. For details, see "1.5 Notes

Regarding Static Electricity."

Execute the showlogs command to identify the component requiring

maintenance.

For details, see "3.3.5 Checking log information."

Confirm the hardware and software configurations.

For details, see "4.2 Confirming the System Configuration."

Stop the entire system.

For details, see "5.4 Stopping the Entire System."

Execute the replacefru command to release the chassis requiring maintenance

from the system.

For a single-chassis configuration, you do not have to release the chassis.

Proceed to step 7.

For details, see "5.1 Releasing an FRU from the System with the replacefru

Command."

Remove all the power cords from the PSU backplane unit of the chassis

requiring maintenance.

For details, see "5.5.2 Removing the power cord."

11.4 Removing a Fan Unit

This section describes the procedure for removing a fan unit. Complete the necessary

preparations prior to attempting the removal. For details, see "11.3 Enabling the

Removal of a Fan Unit."

Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual

･

December 2013212