Server User Manual

Caution -
Before you handle any components, wear a wrist strap to ground any static
electricity. If you perform this procedure without a wrist strap, individual
components or the overall system may be damaged. For details, see "1.5 Notes
Regarding Static Electricity."
10.4.1 Accessing a power supply unit
1.
Remove the front cover.
For details, see "5.5.3 Removing the front cover."
10.4.2 Removing a power supply unit
1.
Remove the power cord from the pow er supply unit requiring maintenance.
2.
Loosen the screws securing the power supply unit and open the lever.
Figure 10-2
Screws securing power supply unit
3.
Hold the lever and pull the power supply unit out of the chassis.
4.
Support the power supply unit from below with one hand and remove it
carefully from its slot.
Chapter 10 Maintaining the Pow er Supply Units 199