Server User Manual

XSCF>
showlogs error
XSCF>
showpparstatus -a
XSCF>
replacefru
XSCF>
showlogs error
10.3.3 Inactive/Hot maintenance
For a single-chassis configuration
1.
Open the rack door.
2.
Log in to the XSCF shell.
3.
Execute the showlogs command to identify the component requiring
maintenance.
For details, see "3.3.5 Checking log information."
4.
Confirm the hardware and software configurations.
For details, see "4.2 Confirming the System Configuration."
5.
Stop the entire system.
For details, see "5.4 Stopping the Entire System."
6.
Execute the showpparstatus command to confirm that the physical partition
requiring maintenance is pow ered off.
7.
Execute the replacefru command to release the power supply unit requiring
maintenance from the system.
For details, see "5.1 Releasing an FRU from the System with the replacefru
Command."
For a building-block configuration
1.
Open the rack door.
2.
Log in to the XSCF shell.
3.
Execute the showlogs command to identify the component requiring
maintenance.
For details, see "3.3.5 Checking log information."
4.
Confirm the hardware and software configurations.
For details, see "4.2 Confirming the System Configuration."
Fujitsu M10-4/Fujitsu M10-4S/SPARC M 10-4/SPARC M10-4S Service Manual
･
December 2013196