Server User Manual

XSCF>
showstatus
XSCF>
showhardconf
XSCF>
showdate
XSCF>
setdate -s 102016592013.0 0
If there is no problem, nothing is displayed.
14.
Execute the show hardconf command to confirm the hardware configuration
and the status of each CPU memory unit.
Confirm that no asterisk (*) is displayed in front of each component.
15.
Execute the show date command to confirm the XSCF time.
There is no need to set the time if the NTP server is set to the XSCF. Proceed to
step 17.
16.
If the XSCF time is different from the current time, execute the setdate
command to set the time.
Specify the time in either of the following formats:
yyyy.MM.DD-hh:mm:ss year.month.day-hour (24-hour clock):minute:second
MMDDhhmmyyyy.ss monthdayhour (24-hour clock) minuteyear.second
In the following example, "October 20, 2013 16:59:00" is specified.
17.
Close the rack door.
Chapter 7 Maintaining the CPU Memory Units 157